Acoustic hemisphere Foams; self-adhesive and non-adhesive in two different models are produced. Self-adhesive acoustic pyramid sponges; the yellow tape on the back of the adhesive surface can be removed and adhered to the surface to be applied. The most important thing to be aware of at this point is; the floor to be applied has a smooth structure. After applying the sponges to the surface to be applied, apply pressure on the acoustic foam; to the surface.
Another model of Acoustic hemisphere Foams: non self-adhesive model can connect to surface with using our special adhesive; solid-based liquid adhesive. After you have turned the adhesive into a container, stick it so that it is not too much to the roller brush and then rub it into the area to which the acoustic panel is applied. We suggest you do not go beyond the size of the panel as you can leave traces. You can apply adhesive to the part by reprinting the material afterwards.
For every kind of questions you can contact us by the phone: +90 216 592 93 16 or you can type to us from contact us page.