Noise Control Grid Foams

For a crisp and tidy approach to sound deadening, the Acoustic Grid foams have a tiled aesthetic for aiding in the reduction of bouncing sonic waves.

Special production can be done but in general sizes are standard. Thickness is not noticeable in sound absorption, but it is more effective than the thicker one. If you want, you can get different colors with different thicknesses of noise control grid foam.

Usage areas

Grid Foams are one of the best solitions for echo absorbing. grid Foams can use at everywhere indoor but mostly usining in sound studios, record rooms and proffessional sound studios.

It’s also a great choice for industrial and commercial applications, such as auditoriums, gymnasiums and anywhere else reducing unwanted noise and reverberations is a priority.


Acoustic grid foams; self-adhesive and non-adhesive in two different models are produced. Self-adhesive acoustic grid foams; the yellow tape on the back of the adhesive surface can be removed and adhered to the surface to be applied. The most important thing to be aware of at this point is; the wall or ceiling to be applied has a smooth structure. After applying the foams to the surface to be applied, apply pressure on the acoustic foam; to the surface.

Another model of Acoustic grid Foams: non self-adhesive model can connect to surface with using our special adhesive; solid-based liquid adhesive. After you have turned the adhesive into a container, stick it so that it is not too much to the roller brush and then rub it into the area to which the acoustic panel is applied. We suggest you do not go beyond the size of the panel as you can leave traces. You can apply adhesive to the part by reprinting the material afterwards.

For every kind of questions you can contact us by the phone: +90 216 592 93 16 or you can type to us from contact us page.